Plumbing, Heating & Air Conditioning Service in Fenton, MO

Completed comprehensive cooling system tune-up and maintenance inspection. System tested and confirmed operational with all components functioning within normal parameters. Inspected air filter showing moderate dust accumulation and verified control board wiring connections, relay operation, and electrical components for proper operation.

Completed comprehensive cooling maintenance on a 9-year-old air conditioning system. Performed standard tune-up procedures including inspection of electrical components, control board, and wiring connections within the air handler unit. Measured and recorded system operating parameters using digital manifold gauges, confirming proper refrigerant pressures and temperatures with readings of 20.8 PSI, supply air temperature of 58°F, and return air temperature of 71°F. All components found operating within normal specifications and system confirmed working properly upon completion of maintenance service.

Replaced damaged power cord on HVAC unit that had been compromised due to repeated pulling during filter changes. Accessed equipment compartment, removed failed power cord, and installed new replacement cord to restore proper electrical connection. System tested and confirmed operational for both heating and cooling modes upon completion.

Completed comprehensive cooling maintenance tune-up on 15-year-old air conditioning system. Performed standard maintenance protocol including inspection of control board and electrical components, verification of all wire connections and contactors, examination of ductwork and air filtration system, and confirmed unit operational status. System tested and operating within normal parameters upon completion.

Completed comprehensive AC tune-up on a single 2013 outdoor unit. Performed standard maintenance procedures including system inspection, filter check, electrical connections verification, and operational testing. Unit found to be in satisfactory working condition with all components functioning within normal parameters.

Completed comprehensive cooling system tune-up on 12-year-old air conditioning unit. Performed standard maintenance procedures including inspection of outdoor condenser unit, verification of proper airflow through top grille assembly, and replacement of heavily soiled 20x20 air filter that showed significant dust and debris accumulation. System operating within normal parameters upon completion of service.

Completed comprehensive cooling system tune-up and maintenance service. Performed system diagnostics using refrigerant manifold gauge to verify proper operating pressures and temperatures, confirming system is functioning within manufacturer specifications. Inspected and documented clean pleated air filters installed in air handling unit, ensuring optimal airflow and indoor air quality for continued efficient system operation.

Completed cooling maintenance tune-up on 15-year-old Amana system. Inspected condenser coil assembly and control board, verified all electrical connections, and confirmed system operational. Customer advised of PMA renewal option for continued maintenance coverage.

Completed cooling maintenance tune-up on 6-year-old Trane system. Performed comprehensive inspection of all components including condenser unit, evaporator coil, electrical connections, and control board. Verified system operation and confirmed unit is functioning properly with all parameters within manufacturer specifications. Inspected condensate drain line and verified proper drainage at floor drain. Examined control board and electrical connections inside air handler, noting all wiring secure and components operational. Checked capacitors, contactors, and safety controls. System tested and confirmed cooling cycle operating normally with no issues detected. Unit ready for continued service.

Completed comprehensive cooling maintenance tune-up on 12-year-old Heil HVAC system. Inspected and serviced all major components including blower motor assembly, electrical connections, and ductwork; replaced heavily soiled air filters with visible dust accumulation. System tested and confirmed operational upon completion.

Completed comprehensive cooling tune-up on 2-year-old outdoor AC unit. Performed standard maintenance protocol including system inspection, blower assembly examination, and air filter assessment. Blower wheel and housing showed normal operational wear with minor dust accumulation; confirmed proper mounting and functionality. Replaced dirty pleated air filter to restore optimal airflow and system efficiency. All components operating within manufacturer specifications upon completion.

Completed installation of copper supply piping and PVC drainage lines through interior wall cavity for washing machine connection. Installed wall plate with pass-through opening to accommodate red and blue water supply hoses and black corrugated drain hose, ensuring proper routing and secure connections to the appliance. All piping was properly secured with metal strapping and positioned to allow adequate clearance within the wall framing alongside existing insulation.

Installed 50-gallon tall gas water heater in residential mechanical room with complete copper supply and discharge piping, brass shutoff valves, and pressure relief valve connections. Applied required plumbing identification sticker and completed installation per permit #26plu-08138. Unit was coordinated for delivery to warehouse and transported to job site by HVAC team for final installation.

Completed comprehensive cooling maintenance tune-up on 9-year-old AC system. Cleaned condenser coils at outdoor unit, cleaned evaporator coil, and verified refrigerant charge levels within manufacturer specifications. System tested and confirmed operating properly with thermostat responding correctly to temperature setpoints.

Responded to no cooling complaint on ground-level unit. Upon arrival, found system frozen and confirmed diagnosis with temperature readings using digital manifold gauge. Inspected 16x25x1 air filter and evaluated system components. Due to frozen condition requiring proper thaw time, rescheduled return visit for complete diagnosis and repair, and left O-ring kit on-site for upcoming service work.

Completed routine cooling maintenance on a 2-year-old AC system. Performed comprehensive tune-up including inspection of control board, blower motor assembly, electrical connections, and wiring harness. Inspected and evaluated air filter condition, noting accumulated dust and debris in pleated media. Verified all system components operational and functioning properly with no deficiencies found.

Completed installation of 50-gallon tall gas water heater with proper expansion tank and pressure regulation components. Configured copper supply and distribution piping with brass fittings, shut-off valves, and safety equipment per code requirements. Installation performed under permit #26PLU-07657 with required plumbing identification sticker applied to unit.

Completed comprehensive air conditioning tune-up on a single ten-year-old residential unit. Performed standard preventive maintenance including inspection of blower assembly, motor components, and electrical connections; all wiring and motor windings found in acceptable condition. Exterior condenser unit and internal components showed normal operational wear with dust accumulation noted on blower housing and base pan, which is typical for a unit of this age.

Completed comprehensive cooling tune-up on single outdoor AC unit mounted on bracket at side of residence. Performed standard maintenance protocol including inspection of air handler interior components, evaporator coil, condensate drain line, and air filtration system. All components found operational with normal wear patterns; system returned to service in proper working condition.

Responded to no cooling complaint on residential HVAC system that was running continuously without achieving temperature setpoint. Upon arrival, performed diagnostic evaluation of system components including control board, wiring connections, and blower assembly. Inspected electrical connections at circuit board, verified proper wire terminations, and assessed overall system operation. Documented equipment condition with interior control panel and return air grill photographs showing typical wear and environmental accumulation. Identified issues preventing proper cooling cycle and provided recommendations for necessary repairs to restore normal system function.