AC, Furnace & Plumbing Services in St. Charles, MO

Completed comprehensive cooling tune-up maintenance on two 9-year-old outdoor AC units. During inspection, discovered significant rust and corrosion on base pan and interior metal surfaces of one unit, along with dust accumulation on control board and electrical connections. Performed standard maintenance procedures including cleaning condenser coils, checking refrigerant levels, testing electrical components, and inspecting all wiring connections. Documented equipment condition with photos showing corroded base pan and control board area for customer records and future service reference.

Completed comprehensive cooling season tune-up on 8-year-old ground-level AC unit located at side of house. Performed standard U10 maintenance protocol including system inspection, operational testing, and preventive maintenance tasks. Renewed preventive maintenance agreement at time of visit and documented UV germicidal light system with lamp replacement date of 12/27/23, along with available replacement air filters on-site.

Completed comprehensive cooling season tune-up on single residential air conditioning system located in basement. Performed standard maintenance protocol including inspection of outdoor condenser unit, verification of proper airflow through louvered fins, and examination of air filtration system. All components found operating within normal parameters, filter media inspected and unit confirmed ready for cooling season operation.

Completed comprehensive cooling maintenance on a 9-year-old air conditioning system. Condenser coil exhibited heavy accumulation of dirt, dust, and debris throughout the fin structure, significantly impacting airflow and heat transfer efficiency. Performed thorough cleaning of condenser coil, removing substantial buildup from aluminum fins and exterior surfaces. Inspected all system components, verified proper operation, and confirmed unit is functioning correctly. Customer renewed maintenance membership on-site.

Completed comprehensive cooling system maintenance and tune-up on residential HVAC unit. Performed full system inspection including electrical components, blower motor assembly, and condenser coil examination. All components found operating within normal parameters, connections secure, and system functioning properly at time of service completion.

# HVAC Tune-Up Completed Performed comprehensive preventive maintenance tune-up on a 10-year-old residential air conditioning unit located at side of home. Conducted electrical diagnostics using digital multimeter to verify system amperage draw and temperature readings at condenser coil assembly, with measurements indicating 0.00A and 549°F recorded during testing sequence. Inspected condenser coil fins, which were found to be in good condition with proper alignment and no visible debris accumulation or damage requiring corrective action.

Responded to service call for water leakage near evaporator coils on 13-year-old residential air conditioning system. Upon arrival, inspected wall-mounted condensing unit and traced condensate drainage system through basement mechanical room. Located source of water leakage at evaporator coil drain pan and condensate line connections. Cleared blockage in condensate drain line, verified proper drainage flow, and confirmed drain pan integrity. Inspected air handler, ductwork connections, and associated PVC condensate piping for additional issues. System tested and cycled to ensure proper condensate removal with no further leakage detected.

Completed preventive maintenance tune-up on a single residential HVAC system aged 0-5 years. Inspected outdoor condenser unit and noted significant dirt and debris accumulation on exterior filter/screen requiring cleaning. Accessed interior blower assembly and motor compartment, verified electrical connections and wiring harness integrity, and confirmed proper operation of all components. System is functioning correctly following standard maintenance procedures.

Completed comprehensive tune-up service on a Carrier CNPVP3714AAA air conditioning unit per Home Depot promotional maintenance agreement. Inspected and documented system components, including the TRION Air Bear pleated air filter which showed moderate dust accumulation and was noted for future replacement consideration. All unit specifications and manufacturer labels were verified and photographed for service records.

Completed scheduled cooling maintenance visit on residential HVAC system. Performed comprehensive inspection of evaporator coil assembly, confirming proper fin alignment and refrigerant line integrity with normal oxidation present on copper tubing. Replaced dirty air filter with accumulated debris, ensuring optimal airflow and system efficiency. System tested and operating within normal parameters upon completion.

Completed preventive maintenance tune-up on two cooling systems. Performed comprehensive inspection of both HVAC units, including examination of control boards, electrical connections, and wiring configurations. Verified proper operation of all system components and controls. Replaced air filter with new pleated media filter to ensure optimal airflow and indoor air quality. Confirmed both systems are operating within normal parameters and ready for the cooling season.

Responded to service call for kitchen double sink with drainage issue on garbage disposal side. Upon inspection, found existing garbage disposal unit contributing to clogging problem. Assessed under-sink plumbing configuration including white PVC P-trap assembly and drainage connections. Evaluated garbage disposal unit condition and drainage system functionality. Documented existing plumbing setup showing standard residential sink drainage with P-trap configuration, braided supply lines, and black cylindrical disposal unit with visible age-related wear. Prepared work area with protective measures to contain potential water spillage during service. Provided customer with assessment findings and replacement recommendations for garbage disposal unit to resolve ongoing drainage concerns.

Completed seasonal cooling tune-up on 2-year-old Trane air conditioning system. Performed comprehensive inspection revealing significant dust and debris accumulation on evaporator coil fins and return air grille, which was restricting airflow and reducing system efficiency. Cleaned evaporator coil assembly, removing heavy buildup from aluminum fins and around copper refrigerant lines, then cleaned return air vent to restore proper air circulation. Verified refrigerant line insulation integrity, checked all electrical connections, and tested system operation to ensure optimal cooling performance.

Completed comprehensive cooling season tune-up on 16-year-old outdoor AC unit. Performed full system inspection including control board diagnostics, electrical connections verification, refrigerant level assessment, and overall component evaluation. Unit operational and ready for cooling season demands.

Completed cooling system tune-up on residential air conditioning unit over 10 years old located in side yard. Performed comprehensive system inspection including electrical components, control board, and wiring connections. Inspected and documented MANN+HUMMEL air filter showing normal dust accumulation from use. Verified proper operation of all electrical controls, relays, and safety devices on control board. All components found functioning within normal parameters for unit age.

Completed comprehensive cooling maintenance and AC tune-up on a 9-year-old air conditioning system. Upon inspection, discovered significant dust accumulation on the blower wheel assembly and evaporator coils exhibiting extensive frost buildup. Performed electrical diagnostics using multimeter, recording amperage readings to verify system performance. Cleaned blower wheel blades and addressed refrigerant flow issues contributing to coil freezing condition. System tested and confirmed operational following service completion.

Performed comprehensive cooling maintenance tune-up on residential air conditioning system. Completed full system inspection including electrical components, capacitor connections, and condenser unit internal components. Verified all wire connections secure, inspected dual capacitor with proper wire terminations, and confirmed absence of corrosion or component degradation. Inspected evaporator coil and condenser coil fins for cleanliness and proper airflow. Replaced air filter with new unit to ensure optimal system performance and indoor air quality. Tested system operation and confirmed unit cooling properly with all components functioning within normal parameters.

# No Cooling - Lennox AC Unit Responded to no cooling call on 4-year-old Lennox air conditioning system. Upon arrival, confirmed unit was not operating. Conducted visual inspection of outdoor condenser unit and discovered severely clogged condenser coils with heavy accumulation of dirt, dust, and debris restricting airflow. Additionally found dirty air filter with significant particulate buildup affecting system performance. Removed and cleaned condenser coils to restore proper heat exchange capacity. Replaced dirty air filter with new filter. Verified proper refrigerant line connections and electrical connections at outdoor unit. Cycled system on and confirmed unit now operating properly with adequate airflow across coils and proper cooling output. Advised ongoing maintenance schedule to prevent future airflow restrictions.

Responded to service call for thermostat malfunction and complete loss of power to HVAC unit following recent preventative maintenance. Upon inspection, discovered loose low-voltage wiring connections at the air handler that had become disconnected. Reconnected and secured all thermostat control wiring, verified proper voltage at terminals, and restored full system operation. Unit tested successfully with thermostat responding properly to all commands.

Completed comprehensive cooling system tune-up on a 7-year-old residential air conditioning unit located at side of house. Performed standard seasonal maintenance protocol including electrical diagnostics using digital multimeter and clamp meter to verify proper voltage, amperage, and system performance parameters. All measurements recorded within manufacturer specifications, confirming optimal electrical operation and system efficiency for the cooling season.