AC, Furnace & Plumbing Services in St. Charles, MO

Completed seasonal cooling tune-up on 12-year-old residential air conditioning system located in backyard. Performed comprehensive inspection of indoor air handler unit, checked blower assembly operation, verified electrical connections and wiring integrity, and confirmed all components functioning within normal parameters.

Completed cooling system tune-up on single AC unit located at side of home. Performed comprehensive inspection of blower motor assembly, verified proper electrical connections and wire management at junction box, and examined internal components within the air handler plenum. Replaced air filter with new pleated media filter to ensure optimal airflow and system efficiency.

Completed comprehensive cooling maintenance on 15-year-old Trane system. Performed full AC tune-up including inspection of blower motor assembly and centrifugal fan wheel, verified proper operation of electrical connections and motor components, and replaced air filtration media. All mechanical components inspected and found operating within normal parameters, system confirmed working properly upon completion.

Responded to no heat call for furnace running continuously but blowing only cold air. Upon inspection of the 10+ year old basement unit, utilized camera inspection equipment to examine the heat exchanger and discovered significant deterioration and debris accumulation within the system. Found compromised heat exchanger with visible material breakdown and blockage affecting proper heat transfer and airflow. Documented findings with photographic evidence showing internal ductwork condition and heat exchanger damage. Advised on necessary repairs to restore heating function and ensure safe operation of the furnace system.

Completed comprehensive cooling maintenance on 9-year-old Trane air conditioning system. Performed standard tune-up procedures including inspection of outdoor condenser unit, verification of refrigerant levels, electrical connections check, and thermostat operation testing. System evaluated and confirmed to be operating within normal parameters with no deficiencies noted.

Completed comprehensive cooling season tune-up on single outdoor condensing unit. Performed standard maintenance protocol including inspection of condenser coils, which showed moderate accumulation of debris and dust requiring attention, verified fan operation and electrical connections, and documented unit condition with photographs. System operational upon completion with recommendations provided for ongoing maintenance.

Completed comprehensive cooling maintenance on 15-year-old Trane air conditioning system. Performed full system inspection including electrical connections, capacitor testing, refrigerant line examination, and component evaluation. Accessed outdoor unit service compartment, inspected compressor, verified all refrigerant connections and insulation integrity on copper lines. Checked capacitor function and electrical wiring connections throughout control panel. Cleaned debris accumulation from interior compartment and exterior surfaces. All components tested and operating within normal parameters; system confirmed cooling properly with no immediate service needs identified.

Responded to callback for heating system still blowing cold air after sequencer replacement. Upon arrival, performed electrical diagnostics using digital multimeter to verify amp draw and voltage readings across heating elements and sequencer circuits. Measurement of 25.72 displayed on meter during testing indicated potential issue with heating element operation or sequencer staging. Inspected all electrical connections, terminal blocks, and wiring associated with electric heat strips to identify root cause of continued cold air complaint and determine if additional repairs beyond initial sequencer replacement were necessary.

Completed comprehensive cooling season tune-up on 3-year-old outdoor condensing unit. Performed system diagnostics including electrical measurements with multimeter, inspected condenser coil fins and fan assembly, and verified proper operation of all components. Unit found to be operating within normal parameters with no deficiencies noted.

Responded to a cooling system failure on a Lennox unit. Diagnosed a faulty low pressure switch preventing the system from operating properly. Removed the defective low pressure switch and installed a replacement screw-in style low pressure switch sourced from Johnstone Supply. Tested system operation and verified proper cooling functionality. Discarded the failed component and cleared the service call.

Responded to no cooling call on 10+ year old air conditioning system. Upon arrival, found thermostat set to cool mode at 78°F but unit producing only ambient air with no temperature drop. Performed diagnostic evaluation of system components including thermostat functionality and electrical connections at air handler terminal block. Inspected wiring integrity and terminal connections, noting age-related deterioration of equipment. Identified root cause of cooling failure and completed necessary repairs to restore proper system operation. Unit tested and verified cooling cycle functioning correctly upon departure.

Completed comprehensive tune-up and maintenance service on residential HVAC system per Home Depot work order F58176315. Performed system diagnostics and operational testing, confirming unit functionality with digital measurement instrumentation. Inspected and verified proper air filter installation, noting pleated media filter properly seated in overhead air handler mounting frame with adequate insulation integrity in attic-mounted equipment area.

Completed annual cooling maintenance and tune-up on HVAC system. Performed comprehensive system diagnostics using digital multimeter and clamp meter to verify electrical readings, measured supply air temperature at 172.9°F, and confirmed amperage draw at 5.19 amps. All measurements within manufacturer specifications and system operating properly with no deficiencies noted.

Completed cooling maintenance tune-up on residential HVAC system. Inspected control board, blower motor assembly, and evaporator coil; verified all electronic components, wiring connections, and heat exchanger fins were clean and functioning properly. System operational with no deficiencies noted at time of service.

Completed comprehensive cooling tune-up on 4-year-old ground-level AC unit during morning service window. Performed full system inspection including control board evaluation, thermostat functionality verification showing system idle at 74°F setpoint, and electrical connections assessment. All components found operating within normal parameters with no deficiencies noted; system ready for cooling season operation.

Installed replacement condenser coil on HVAC system under warranty coverage. Removed and disposed of failed original coil, then installed new unit supplied by Lennox. System tested and verified operational for both heating and cooling functions upon completion.

Responded to service call regarding outdoor condenser coil positioning concern. Upon inspection, verified that the unit's coil configuration and 90-degree angle orientation is factory standard design for this model. Condenser unit operating as designed with proper refrigerant line connections and no issues identified. Documented unit condition with photos for service records.

Responded to thermostat error code indicating low secondary 24 VAC voltage on hallway unit U10. Performed diagnostic inspection of HVAC system, checking electrical connections, transformer output, and control circuit voltage levels in confined attic space. Inspected outdoor condenser unit, noting accumulated dirt and debris on coil fins that could impact system efficiency and airflow, documenting conditions with photographs for service records.

Completed comprehensive electrical inspection of residential property. Evaluated exposed basement ceiling infrastructure including lighting fixtures, electrical panel with dual-row circuit breaker configuration, and associated wiring systems. Documented condition of electrical panel showing multiple branch circuits with red, black, and white conductors, examined recessed LED lighting installation with visible mounting hardware and support conduit, and assessed overall electrical system integrity in unfinished utility space. Photographed findings for record-keeping purposes, noting exposed insulation material near electrical components and standard residential electrical installation configuration.

Responded to no cooling complaint on 3-year-old residential air conditioning system. Upon inspection, found outdoor condenser coil heavily contaminated with dirt, dust, and debris accumulation restricting airflow and preventing proper heat transfer. Thoroughly cleaned condenser coil to restore system efficiency and airflow. Unit tested and confirmed operational with proper cooling restored throughout home.